Description
Features
- Designed to hold all Quick-Lock add-on kits required for the 120 lb pair, plus space for 2 kettlebell handles and more.
- Dimensions: 24" wide x 20" deep x 23.5" tall.
- Storage shelf clearance is 16".
- Heavy-duty steel construction with rubber surfaces for the dumbbells and plate storage.
- Angled Quick-Lock screw storage shelves to optimized plate changing.
- Textured black powder coat finish with tough rubberized shelf protection
- Smooth rolling 3.5" industrial caster wheels; 2 with easy locking foot pedal.
- Weight: 60 lb
- 400 lb weight capacity
Heavy-duty and efficient
The world's strongest, and most expansive, adjustable dumbbells deserve an equally impressive storage stand. This belief, plus so much iron, is what led us to create the PRO Stand for Quick-Lock Adjustable Dumbbells. Purpose built to accomodate space for our large range of weight plate add-ons, and to optimize ergonomics for the fastest weight changes possible.
- Maximum efficiency. This stand is capable of supporting a pair of Quick-Lock adjustable dumbbells up to 120 lbs, and 135 lbs with Heavy Handle Plate kit installed, plus more storage below.
- Optimized for speed. Through intentional design, the PRO Stand allows you to adjust the weight of your dumbbells; just 20 seconds to add even 30 lbs to each QLDB.
- Built for to last: Our stand uses only the most sturdy materials for its screws, nuts, surfaces all the way down to its industrial rolling casters.
- Safe space for your dumbbells. The top surface and storage shelf are furnished with rubber covering to keep your dumbbells, and weight plates in place. Screw storage inserts are protected by super durable nylon rings, for smooth scratch-free transitions.
Spacious and organized storage
- Multi-storage stand. Our dumbbell storage stand is designed to hold all of our Quick-Lock add-on kits and hardware, plus room to space. The top surface can hold two 120 lb Quick-Lock adjustable dumbbells placed lengthwise, and three stacks of Quick-Lock plates, while the storage shelf can accommodate your dumbbell plates, add-on weight kits, locking screws, or even a couple Quick-Lock kettlebell handles.
- Locking Screw Storage. Our angled storage for your locking screws will enable you to change weights quicker by placeing them in easy reach.
- All in one place. Put your QLDB handles, weight plates, and locking screws all together on this stand when not in use, so you don't have to waste time looking for any missing part prior to your workout.
User-friendly and classy with a compact footprint
- Lock it in. 2 of the 4 heavy duty caster wheels have a foot-operated lever to easily unlock and lock the stand in place.
- Roll out. The firm rubber caster wheels rolls easily and quietly on both carpet and gym flooring.
- Space-saving. This dumbbell stand is big enough to handle a lot, but still compact to fit in any gym space.
Reviews
Currently Viewing Reviews with a rating of 5. Click here to reset.
6
0
0
0
0
Daniel A (Las Vegas, NV) | June 28th, 2026
Straight to the point if you have the old stand, any stationary stand in general, this is a massive upgrade and I can’t recommend it enough. Easy buy.
Now in detail, the surface area compared to the original stand is nearly twice as big but the best part in my opinion is the bottom area is so much more spacious than the previous stand it makes a huge difference if you own the adjustable kettlebell and some smaller attachments or things such as a pair of d handles, a cable curl, chalk to name a few. It is shorter than the original stand by a few inches but nothing major and for me personally more preferable.
Truthfully the assembly drawing made me feel a bit slow since it looked like a giant puzzle layered on top of each other but once I understood it, it took around 10-15 minutes to assemble with my own tools.
The only real problem I had was while assembling the side frame with the bottom frame there was a bit of rust dust every turn I made on the bolts. I noticed some small but noticeable rust build up in both inner parts of the side frame near where the bolts go in. Truthfully I’m not overly concerned because I could always clean the rust off still something to note.
This stand makes my little garage gym feel even more premium and gives me a huge quality of life upgrade especially since I clean my gym every two weeks and deep clean once a month . 5/5
Now in detail, the surface area compared to the original stand is nearly twice as big but the best part in my opinion is the bottom area is so much more spacious than the previous stand it makes a huge difference if you own the adjustable kettlebell and some smaller attachments or things such as a pair of d handles, a cable curl, chalk to name a few. It is shorter than the original stand by a few inches but nothing major and for me personally more preferable.
Truthfully the assembly drawing made me feel a bit slow since it looked like a giant puzzle layered on top of each other but once I understood it, it took around 10-15 minutes to assemble with my own tools.
The only real problem I had was while assembling the side frame with the bottom frame there was a bit of rust dust every turn I made on the bolts. I noticed some small but noticeable rust build up in both inner parts of the side frame near where the bolts go in. Truthfully I’m not overly concerned because I could always clean the rust off still something to note.
This stand makes my little garage gym feel even more premium and gives me a huge quality of life upgrade especially since I clean my gym every two weeks and deep clean once a month . 5/5
michael (IN) | May 12th, 2026
You get what you pay for. I was unsure about the price but I pulled the trigger. After I assembled it and started using it, I see how sturdy and nice the cart was. This makes using and storing the qldb very nice.
Jerry G. (Wisconsin) | April 8th, 2026
The PRO Stand 120 is a massive upgrade from the standard stand. Not only will it old a set of QL's with the 120 pound add-ons, but two KB handles and more. It's heavy duty and the casters make pulling everything from bench to bench so much easier than carrying the dumbbells back and forth.
Chuck Marchand | February 19th, 2026
Love it! No regrets!
Carlos (Texas) | February 17th, 2026
I was skeptical about buying this as there were no reviews, but decided to pull the trigger as I needed a stand for the IM DBs I purchased. I didn't want to go with the original stand as it appeared to small for my needs and due to lack of wheels. This fits my needs perfectly as I soon plan to expand from my 75lb kit with heavy handles to the 120lb add on kit. It rolls smoothly and has locks on the wheels to keep it in place. My only wish is that it had some type of horizontal posts to store the unused weights on as it would be easier to grab weights that way vs laying them flat.
Jeff | February 13th, 2026
I'm very pleased with this purchase. It's quite sturdy and the perfect size for a small space. Mine is comfortably holding the Ironmaster dumbbells and weight plates on top plus two sets of urethane dumbbells (15 and 25 lbs) and some extra weights from an adjustable dumbbell on the bottom shelf.
